Dimmer Switch: Testing and Inspection

METER: LIGHT CONTROL RHEOSTAT: INSPECTION

1. INSPECT LIGHT CONTROL RHEOSTAT





(a) Inspect the light control rheostat.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the rheostat.

(b) Inspect the TAIL cancel switch.

HINT
The TAIL cancel switch is built into the light control rheostat.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the rheostat.