Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR: REMOVAL

CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT DOOR SCUFF PLATE LH Removal

3. REMOVE REAR DOOR SCUFF PLATE LH Removal

4. REMOVE CENTER PILLAR GARNISH LOWER LH Removal

5. REMOVE SIDE AIRBAG SENSOR ASSEMBLY LH





(a) Disconnect the connector.

(b) Remove the bolt and sensor.