Removal

OTHER SYSTEM: REAR POWER OUTLET SOCKET: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR DOOR SCUFF PLATE LH Removal

3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

4. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY

5. REMOVE TONNEAU COVER ASSEMBLY

6. REMOVE REAR FLOOR NO. 1 BOARD

7. REMOVE DECK BOARD ASSEMBLY

8. REMOVE REAR FLOOR NO. 3 BOARD

9. REMOVE REAR FLOOR NO. 2 BOARD

10. REMOVE REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE Removal

11. REMOVE BACK DOOR WEATHERSTRIP

12. REMOVE REAR FLOOR FINISH PLATE Removal

13. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH

14. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY

15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/ Rear No. 2 Seat) Removal

16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/o Rear No. 2 Seat) Removal

17. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY





(a) Detach the 2 claws fittings and remove the socket.