Removal

OTHER SYSTEM: VOLTAGE INVERTER: REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE LH Removal

2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

3. REMOVE REAR FLOOR NO. 1 BOARD (w/o Rear No. 2 Seat)

4. REMOVE DECK BOARD ASSEMBLY (w/o Rear No. 2 Seat)

5. REMOVE NO. 2 SEAT HINGE COVER LH (w/ Rear No. 2 Seat) Removal

6. REMOVE NO. 2 SEAT HINGE COVER RH (w/ Rear No. 2 Seat)

HINT
Use the same procedures described for the LH side.

7. REMOVE NO. 2 SEAT LEG COVER LH (w/ Rear No. 2 Seat) Removal

8. REMOVE NO. 2 SEAT LEG COVER RH (w/ Rear No. 2 Seat)

HINT
Use the same procedures described for the LH side.

9. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat) Removal

10. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)

HINT
Use the same procedures described for the LH side.

11. REMOVE REAR FLOOR NO. 3 BOARD

12. REMOVE REAR FLOOR NO. 2 BOARD

13. REMOVE REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE Removal

14. REMOVE REAR FLOOR FINISH PLATE Removal

15. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY (w/o Rear No. 2 Seat) Removal

16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/o Rear No. 2 Seat) Removal

17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/ Rear No. 2 Seat) Removal

18. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH (w/o Rear No. 2 Seat) Removal

19. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH (w/ Rear No. 2 Seat) Removal

20. REMOVE VOLTAGE INVERTER ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 2 bolts and voltage inverter assembly.