Disassembly

U241E AUTOMATIC TRANSAXLE: SECOND BRAKE PISTON: DISASSEMBLY

1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

(a) Place SST on the return spring and compress.





SST : 09387-00060

(b) Using a screwdriver, pry out the snap ring.

(c) Remove the piston return spring.





2. INSPECT 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY Second Brake Piston

3. REMOVE 2ND BRAKE PISTON

(a) Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.





4. REMOVE 2ND BRAKE PISTON O-RING

(a) Remove the 2 O-rings from the 2nd brake piston.