Installation
DIFFERENTIAL: DIFFERENTIAL CARRIER OIL SEAL: INSTALLATION
1. INSTALL DIAPHRAGM OIL SEAL
(a) Apply a light coat of MP grease No. 2 to the lip of a new diaphragm oil seal.
(b) Using SST and a hammer, tap the diaphragm oil seal into the rear differential carrier according to the specification.
SST : 09710-30021
09710-03121
SST : 09950-60010
09951-00570
SST : 09950-70010
09951-07100
Standard distance:
7.0 +/-0.5 mm (0.276 +/-0.0197 in.)
2. INSTALL TRANSMISSION COUPLING SHIM Reassembly
3. INSTALL TRANSMISSION COUPLING CONICAL SPRING WASHER Reassembly
4. INSTALL YOKE Reassembly
5. INSTALL 4WD LINEAR SOLENOID Reassembly
6. INSTALL ELECTROMAGNETIC COUPLING Reassembly
7. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
(a) Install the propeller shaft Installation.
8. ADD DIFFERENTIAL OIL Testing and Inspection