Installation

BRAKE: FRONT BRAKE: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedures listed below are for the LH side.
1. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH

(a) Install the cylinder with the 2 bolts.





Torque : 34 Nm (350 kgf-cm, 25 ft-lbf)

2. CONNECT FRONT FLEXIBLE HOSE

(a) Install a new gasket and connect the flexible hose with a new union bolt.





Torque : 29 Nm (300 kgf-cm, 22 ft-lbf)

HINT
Install the flexible hose lock securely in the lock hole in the cylinder.

3. REMOVE COWL TOP VENTILATOR LOUVER BRACKET LH Bleeding

4. BLEED BRAKE SYSTEM Bleeding

5. INSTALL COWL TOP VENTILATOR LOUVER BRACKET LH Bleeding

6. INSTALL FRONT WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)