Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2010 >> Sequoia 4WD V8-4.6L (1UR-FE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Keyless Entry Transmitter >> Keyless Entry Transmitter Battery >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry Transmitter Battery: Service and Repair





DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT

1. REPLACE TRANSMITTER BATTERY

NOTICE:
Be careful when handling each component as they are precision electronic components.

(a) Using a screwdriver with its tip wrapped in protective tape, and turn the screwdriver to disengage the cover.





NOTICE:
Do not forcibly pry up the cover.

(b) Remove the battery (lithium battery: CR2032).





NOTICE:
* Do not push the terminals with your finger.
* Do not forcibly pry up the battery. The terminals may be damaged.
* Do not touch the battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter, it may interfere with the proper operation.
(c) Install a battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.





NOTICE:
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.
(d) Engage the cover securely.
pro multis · About Operation CHARM