Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2010 >> Sienna FWD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER LH Removal

4. REMOVE FLOOR CARPET COVER CENTER LH Removal

5. REMOVE FLOOR CARPET COVER CENTER RH

HINT
Use the same procedures for the floor carpet cover center RH and floor carpet cover center LH.

6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

7. REMOVE INSTRUMENT PANEL BOX NO.2 Removal

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER Removal

9. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER Removal

10. REMOVE AIR DUCT NO.4 REAR

11. REMOVE AIR DUCT NO.3 REAR

12. REMOVE AIR DUCT NO.1 REAR

13. REMOVE CENTER AIRBAG SENSOR ASSEMBLY

(a) Disconnect the 3 connectors from the center airbag sensor assembly.





(b) Remove the 3 bolts and the center airbag sensor assembly.
pro multis · About Operation CHARM