C1288

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: C1288/88: ECU Version Miss Match
C1288/88 - ECU Version Miss Match

DESCRIPTION





INSPECTION PROCEDURE

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM

(a) Check if a CAN communication system DTC is output Diagnosis System.

Result:





B -- INSPECT CAN COMMUNICATION SYSTEM How to Proceed With Troubleshooting
A -- Continue to next step.

2. PERFORM ENGINE VARIANT LEARNING

(a) Perform engine variant learning Programming and Relearning.

HINT
* Engine variant learning is automatically performed immediately after the Test Mode is entered.
* If learning has not yet been performed, the ABS warning and slip indicator lights will remain on and DTC C1288/88 will be stored.

NEXT -- Continue to next step.

3. RECONFIRM DTC

(a) Turn the ignition switch off.

(b) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

(c) Start the engine.

(d) Check if the same DTC is recorded Reading and Clearing Diagnostic Trouble Codes.

Result:





C -- REPLACE ECM (for 1AR-FE) Removal

B -- REPLACE ECM (for 2GR-FE) Removal

A -- END