Smart Key System (for Start Function)

THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function): CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT
The items in the table below can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current setting before customizing.
* When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Smart Key / Utility / Customize Setting.

(e) Select the setting by referring to the table below.

Smart Key:

2. CUSTOMIZING FUNCTION WITHOUT TECHSTREAM

Performing the following procedure disables the smart key system.

HINT
To start the engine while the smart key system is disabled, follow the procedure for when the key battery is low Smart Key System (for Start Function).

(a) The procedure to disable the smart key system is as follows:

HINT
Repeating the following steps switches the smart key system status between activated and disabled.

(a) Preconditions:

Engine switch off, driver door closed and unlocked.

(1) Press the unlock switch of the key once.

(2) Open the driver door within 5 seconds after pressing the unlock switch of the key in the previous step.

(3) Repeat closing and opening of the driver door twice within 30 seconds after opening the driver door in the previous step.

(4) Press the unlock switch of the key twice within 30 seconds after the last closing of the driver door in the previous step.

(5) Close and then open the driver door within 30 seconds after pressing the unlock switch of the key twice in the previous step.

(6) Close the driver door within 5 seconds after opening the driver door in the previous step.

(7) Check that the wireless buzzer sounds once*1 or twice*2.

* *1: When the smart key system status is changed from activated to disabled.

* *2: When the smart key system status is changed from disabled to activated.