Smart Key System (for Start Function)

THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function): DATA LIST / ACTIVE TEST

1. DATA LIST

HINT
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Power Source Control / Data List.

(e) Read the Data List according to the display on the Techstream.

Power Source Control:

(f) Enter the following menus: Body Electrical / Starting Control / Data List.

(g) Read the Data List according to the display on the Techstream.

Starting Control:

(h) Enter the following menus: Body Electrical / Smart Key / Data List.

(i) Read the Data List according to the display on the Techstream.

Smart Key:

2. ACTIVE TEST

HINT
Using the Techstream to perform Active Tests allows relay, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Power Source Control / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Power Source Control:

(f) Enter the following menus: Body Electrical / Starting Control / Active Test.

(g) Perform the Active Test according to the display on the Techstream.

Starting Control:

(h) Enter the following menus: Body Electrical / Smart key / Active Test.

(i) Perform the Active Test according to the display on the Techstream.