Disassembly

SEAT: REAR SEAT ASSEMBLY (for LH Side): DISASSEMBLY

1. REMOVE SEAT ADJUSTER COVER CAP LH

(a) Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the seat adjuster cover cap LH.

Text in Illustration:

2. REMOVE REAR SEAT RECLINING RELEASE LEVER LH

(a) Remove the 3 screws and the rear seat reclining release lever LH.





3. REMOVE REAR SEAT RECLINING COVER LH

(a) Remove the 2 screws.





(b) Disengage the 2 guides and remove the rear seat reclining cover LH.

4. REMOVE REAR SEAT INNER RECLINING COVER LH

(a) Remove the 2 screws.





(b) Disengage the guide and remove the rear seat inner reclining cover LH.

5. REMOVE REAR SEAT CUSHION COVER WITH PAD

(a) Disengage the 3 hooks.





(b) Disengage each hook and remove the rear seat cushion cover with pad.





6. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

(a) Disengage the 8 hog rings and remove the separate type rear seat cushion cover.





7. REMOVE REAR SEAT INNER BELT ASSEMBLY LH Removal

8. REMOVE REAR SEATBACK BOARD LH

(a) Disengage the 17 claws.





(b) Disengage the 3 clips and 3 guides, and remove the rear seatback board LH as shown in the illustration.





9. REMOVE REAR SEAT HEADREST SUPPORT LH

(a) Disengage the 2 claws and remove the rear seat headrest support LH.





10. REMOVE REAR SEAT HEADREST SUPPORT RH

(a) Disengage the 2 claws and remove the rear seat headrest support RH.





11. REMOVE REAR SEATBACK COVER WITH PAD

(a) Disengage the 2 hog rings and remove the rear seatback cover with pad.





12. REMOVE SEPARATE TYPE REAR SEATBACK COVER

(a) Disengage the 10 hog rings and remove the separate type rear seatback cover.





13. REMOVE REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY

(a) Disengage the 4 control cable clamps and claw as shown in the illustration.





(b) Remove the 2 clamps and the rear seat No. 2 reclining control cable sub-assembly.

14. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY LH

(a) Remove the 2 bolts.





(b) Using a T45 "TORX" socket, remove the 2 "TORX" bolts, 2 bushes and the rear seat cushion frame sub-assembly LH.

15. REMOVE RECLINING ADJUSTER INSIDE COVER LH

(a) Remove the 2 screws.





(b) Disengage the claw and 2 guides, and remove the reclining adjuster inside cover LH.

16. REMOVE REAR SEAT LEG SIDE COVER LH

(a) Remove the screw.





(b) Remove the rear seat leg side cover LH.

17. REMOVE RECLINING ADJUSTER INSIDE COVER RH

(a) Remove the 2 screws.





(b) Disengage the claw and 2 guides and remove the reclining adjuster inside cover RH.

18. REMOVE REAR SEAT LEG SIDE COVER

(a) Remove the screw.





(b) Remove the rear seat leg side cover.

19. REMOVE NO. 1 SEAT LEG ASSEMBLY LH

(a) Using a T55 "TORX" socket, remove the 4 "TORX" bolts and the No. 1 seat leg assembly LH.