Programming and Relearning

SEAT BELT: SEAT BELT WARNING SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZE FUNCTION WITH TECHSTREAM

NOTICE:
* Be sure to record the current settings before customizing.
* These buzzers should be ON for safe driving. Perform these procedure only if it is necessary to set the buzzer OFF (disabled).
HINT
The following items can be customized using the Techstream.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Combination Meter / Utility / Customize Setting.

(e) Select the setting by referring to the table below.

Combination Meter:

HINT
This setting is only valid for the buzzer which sounds at 20 km/h (13 mph) or more.