Installation

THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION

1. INSTALL CERTIFICATION ECU

(a) Attach the 2 claws to install the certification ECU.

2. INSTALL ECU INTEGRATION BOX RH

(a) Install the certification ECU with bracket with the 2 nuts and bolt.

(b) Attach the clamp and connect the connectors.

3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY Installation

4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL BOX DOOR COVER Installation

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

7. INSTALL LOWER INSTRUMENT COVER LH Installation

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

9. INSTALL COWL SIDE TRIM BOARD RH Installation

10. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. REGISTER ECU CODE

(a) Register the ECU code Engine Immobiliser System (W/ Smart Key System).

13. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Installation.