Removal

HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 2 SWITCH HOLE BASE Removal

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

4. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

5. REMOVE COMBINATION METER ASSEMBLY Removal

6. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)





(a) Disconnect the connector and hose.

(b) Detach the 2 claws and remove the cooler thermistor.