Removal
HEATING / AIR CONDITIONING: COMPRESSOR (for 2TR-FE): REMOVAL
1. REMOVE UPPER RADIATOR SUPPORT SEAL Removal
2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair
3. REMOVE FRONT BUMPER COVER LOWER Removal
4. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal
5. DRAIN ENGINE COOLANT Service and Repair
6. REMOVE RADIATOR RESERVOIR Removal
7. REMOVE NO. 1 RADIATOR HOSE Removal
8. REMOVE NO. 2 RADIATOR HOSE Removal
9. REMOVE FAN AND GENERATOR V BELT Removal
10. REMOVE FAN SHROUD Removal
11. REMOVE VANE PUMP ASSEMBLY
(a) Remove the vane pump assembly Removal.
12. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the discharge hose sub-assembly from the compressor.
(b) Remove the O-ring from the discharge hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
13. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the suction hose sub-assembly from the compressor.
(b) Remove the O-ring from the suction hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
14. REMOVE COOLER COMPRESSOR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 bolts and compressor.