Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

(a) Install the clearance warning ECU with the bolt.

(b) Connect the connector.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

5. INSTALL COWL SIDE TRIM BOARD LH Installation

6. INSTALL DOOR SCUFF PLATE ASSEMBLY LH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.