Fluid - M/T: Service and Repair

EB62 MANUAL TRANSAXLE: MANUAL TRANSAXLE OIL: REPLACEMENT

1. DRAIN MANUAL TRANSAXLE OIL

(a) Remove the filler plug and gasket.





(b) Remove the drain plug and gasket to drain the manual transaxle oil.

(c) Install the drain plug with a new gasket.

Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)

2. ADD MANUAL TRANSAXLE OIL

(a) Add oil until the oil level is within 5 mm (0.197 in.) from the bottom of the transmission filler plug opening.





(b) Install the transmission filler plug with a new gasket.

Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)

NOTICE:
* When adding transaxle oil, make sure that the vehicle is level.
* An excessively large or small amount of oil may cause problems.
* After adding oil, drive the vehicle and recheck the oil level.

3. INSPECT FOR OIL LEAK