Installation

LIGHTING (EXT): AUTOMATIC LIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

(a) Engage the 2 claws and install the automatic light control sensor.





(b) Connect the connector.

2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY Installation

3. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY Installation

4. INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Installation

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation

7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation

10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

11. INSTALL FRONT PILLAR GARNISH LH Installation

12. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation

13. INSTALL FRONT PILLAR GARNISH RH Installation

14. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

15. INSTALL COMBINATION METER ASSEMBLY Installation

16. INSTALL METER HOOD SUB-ASSEMBLY Installation

17. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

18. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

19. POSITION FRONT WHEELS STRAIGHT AHEAD

20. ADJUST SPIRAL CABLE Installation

21. INSTALL STEERING WHEEL ASSEMBLY Installation

22. INSPECT STEERING WHEEL CENTER POINT

23. INSTALL STEERING PAD Installation

24. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

25. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

26. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

27. INSPECT STEERING PAD Installation

28. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.