Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2011 >> Matrix AWD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION

1. INSTALL STOP LIGHT SWITCH ASSEMBLY

(a) Insert the stop light switch assembly until the rod hits the cushion.





NOTICE:
When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not depressed.

(b) Make a quarter turn clockwise to install the stop light switch assembly.





Torque : 1.5 Nm (15 kgf-cm, 13 in-lbf) or less

NOTICE:
When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not depressed.

(c) Connect the connector.





(d) Check the protrusion of the rod.





Protrusion of the rod:

1.5 to 2.5 mm (0.0591 to 0.0984 in.)

If the protrusion is not within the specified range, adjust it.

NOTICE:
Do not depress the brake pedal.

pro multis · About Operation CHARM