Road Test
CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST
1. INSPECT SET SWITCH
Push the main switch ON.
(b) Drive at a desired speed (40 km/h (25 mph) or higher).
Press the control switch to -/SET.
(d) After releasing the switch, check that the vehicle cruises at the desired speed.
2. INSPECT "+" SWITCH
Push the main switch button ON.
(b) Drive at a desired speed (40 km/h (25 mph) or higher).
Press the control switch to -/SET.
(d) Check that the vehicle speed increases while the control switch is pressed to +/RES, and that the vehicle cruises at the set speed when the switch is released.
Momentarily press the control switch to +/RES and then immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (Tap-up function).
3. INSPECT "-" SWITCH
Push the main switch button ON.
(b) Drive at a desired speed (40 km/h (25 mph) or higher).
Press the control switch to -/SET.
(d) Check that the vehicle speed decreases while the control switch is pressed to -/SET, and the vehicle cruises at the set speed when the switch is released.
(e) Momentarily press the control switch to -/SET, and then immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (Tap-down function).
4. INSPECT CANCEL SWITCH
Push the main switch button ON.
(b) Drive at a desired speed (40 km/h (25 mph) or higher).
Press the control switch to -/SET.
When operating one of the following, check that the cruise control system is canceled.
Depressing the brake pedal
Pushing the cruise control main switch OFF
Pulling the cruise control switch to CANCEL
The shift lever is moved from D or 4 to N, 3, 2 or 1. (for 2GR-FE)
The shift lever is moved from D or 3 to N, 2 or 1. (for 2AR-FE)
5. INSPECT RES (RESUME) SWITCH
Push the main switch button ON.
(b) Drive at a desired speed (40 km/h (25 mph) or higher).
Press the control switch to -/SET.
When operating one of the following, check that the cruise control system is canceled.
Depressing the brake pedal
Pulling the cruise control switch to CANCEL
The shift lever is moved from D or 4 to N, 3, 2 or 1. (for 2GR-FE)
The shift lever is moved from D or 3 to N, 2 or 1. (for 2AR-FE)
After the control switch is pressed to +/RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.