Body - General Maintenance

MAINTENANCE: BODY: GENERAL MAINTENANCE

1. TIGHTEN BOLTS AND NUTS

(a) Tighten the bolts and nuts on the chassis parts listed below, if necessary.

Front axle and suspension

Drivetrain

Rear axle and suspension

Brake system

Engine mounting

Other chassis parts

(b) Tighten the bolts and nuts on the body parts listed below, if necessary.

Seat belt system

Seats

Doors and hood

Body mountings

Fuel tank

Exhaust pipe system

Other body parts

2. REPLACE AIR CONDITIONING FILTER

(a) Remove the glove compartment assembly.

(b) Remove the filter case from the filter outlet.

(c) Remove the filter from the filter case.

(d) Replace the filter with a new one.

(e) Installation is in the reverse order.

3. FINAL INSPECTION

(a) Check the operation of the body parts.

(1) Hood

Auxiliary catch operates properly.

Hood locks securely when closed.

(2) Front and rear doors

Door locks operate properly.

Doors close properly.

(3) Back door

Door lock operates properly.

(4) Seats

Seat adjusts easily and locks securely in any position.

Front seatback locks securely in any position.

Folding-down rear seatbacks lock securely.

(5) Be sure to deliver a clean car. Especially check.

Steering wheel

Shift lever knob

All switch knobs

Door handles

Seats