Installation

AUDIO / VIDEO: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Microphone)

(a) Engage the 2 claws, 4 pins and install the steering pad switch.

(b) Install the 4 screws.

(c) Connect the connector.

2. INSTALL STEERING PAD SWITCH LH (w/o Microphone)

(a) Engage the claw, 2 pins install the steering pad switch LH.

(b) Install the 2 screws.

(c) Connect the connector.

3. INSTALL STEERING PAD Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

5. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.