Installation
CRUISE CONTROL: DRIVING SUPPORT ECU: INSTALLATION
1. INSTALL DRIVING SUPPORT ECU
(a) Install the driving support ECU with the bolt.
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
NOTICE:
Do not install the driving support ECU if it has been damaged or impacted in any way.
(b) Connect the connector.
2. INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY Installation
3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
4. INSTALL COWL SIDE TRIM BOARD RH Installation
5. INSTALL DOOR SCUFF PLATE RH Installation