Removal

2TR-FE EMISSION CONTROL: AIR SWITCHING VALVE: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INTAKE AIR CONNECTOR Removal

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY





(a) Disconnect the mass air flow meter connector.

(b) Disconnect the wire harness clamp.

(c) Loosen the hose clamp bolt, then disconnect the air cleaner hose No. 1.

(d) Disconnect the 2 air cleaner clamps.

(e) Remove the air cleaner cap together with the air cleaner hose No. 1.

4. REMOVE NO.1 EXHAUST MANIFOLD HEAT INSULATOR





(a) Remove the 5 bolts, then remove the exhaust manifold heat insulator No. 1.

5. DISCONNECT AIR INJECTION SYSTEM NO.1 HOSE





(a) Disconnect the air injection system No. 1 hose from the air switching valve.

6. REMOVE INTAKE PIPE INSULATOR





(a) Remove the 4 nuts, then remove the intake pipe insulator.

(b) Remove the 2 gaskets.

7. REMOVE AIR SWITCHING VALVE ASSEMBLY





(a) Disconnect the vacuum hose.

(b) Disconnect the air switching valve connector.

(c) Remove the 2 nuts, then remove the air switching valve.





(d) Remove the gasket.