Body - General Maintenance

MAINTENANCE: BODY: GENERAL MAINTENANCE

1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY

(a) Tighten the bolts and nuts on the chassis parts listed below, if necessary.

Front axle and suspension

Drive train

Rear axle and suspension

Brake system

Engine mounting

Other chassis parts

(b) Tighten the bolts and nuts on the body parts listed below, if necessary.

Seat belt system

Seats

Doors and hood

Body mountings

Fuel tank

Exhaust pipe system

Other body parts

2. REPLACE CLEAN AIR FILTER SUB-ASSEMBLY

(a) Remove the glove compartment assembly.

(b) Remove the filter case from the filter outlet.

(c) Remove the filter from the filter case.

(d) Replace the filter with a new one.

(e) The installation procedures are the removal procedures in reverse order.