Removal

2GR-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE NO. 2 ENGINE UNDER COVER

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Remove the windshield wiper motor and link assembly Removal.

5. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY Removal

6. REMOVE COOL AIR INTAKE DUCT SEAL Removal

7. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

8. REMOVE AIR CLEANER CAP WITH HOSE Removal

9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

10. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Remove the bolt and disconnect the wire harness clamp to separate the engine wire.





(b) Disconnect the 4 oil control valve connectors.

(c) Remove the 4 bolts and 4 oil control valves.





(d) Remove the O-ring from each oil control valve.





Text in Illustration