Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2011 >> Yaris L4-1.5L (1NZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





1NZ-FE EMISSION CONTROL: HEATED OXYGEN SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for Sedan) Removal

3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for Sedan) Removal

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

5. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Hatchback Manual Transaxle) Removal

6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) Removal

7. REMOVE CONSOLE BOX COVER REAR (for Hatchback) Removal

8. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Sedan) Removal

9. REMOVE CONSOLE BOX CARPET Removal

10. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

11. REMOVE INSTRUMENT PAD LOWER LH (for Sedan) Installation

12. REMOVE HEATED OXYGEN SENSOR

(a) Disconnect the sensor connector.

(b) Remove the grommet and pass the sensor connector out of the cabin through the floor panel.

(c) Using SST, remove heated oxygen sensor No. 2.





SST : 09224-00010
pro multis · About Operation CHARM