Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> 4 Runner 4WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Actuator >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1GR-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
* Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
* Be careful that the O-ring is not cracked when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
* Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
* Be careful that the O-ring is not cracked when installing the oil control valve.

(c) Connect the oil control valve connector.

3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
* Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
* Be careful that the O-ring is not cracked when installing the oil control valve.

(c) Connect the oil control valve connector.

4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)

(a) Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

(b) Install the oil control valve with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
* Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
* Be careful that the O-ring is not cracked when installing the oil control valve.

(c) Connect the oil control valve connector.

5. INSTALL NO. 1 AIR CLEANER HOSE Installation

6. INSTALL V-BANK COVER Installation
pro multis · About Operation CHARM