Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL

NOTICE:
Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs Registration.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

3. REMOVE FRONT DOOR SCUFF PLATE RH Removal

4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2 Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER RH Removal

6. REMOVE TIRE PRESSURE WARNING ECU

(a) Disconnect the connector from the tire pressure warning ECU.





(b) Remove the screw and the tire pressure warning ECU.