Installation
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: INSTALLATION
1. INSTALL HOLE PLUG
(a) Install each hole plug to the front frame assembly.
2. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH
(a) Temporarily install a new front suspension member body mounting rear cushion LH while confirming the installation direction.
Text in Illustration
NOTICE:
Position the front suspension member body mounting rear cushion LH in the correct direction.
(b) Install SST as shown in the illustration.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
(c) Using SST, install the front suspension member body mounting rear cushion LH as shown in the illustration.
Text in Illustration
NOTICE:
Check that there is no clearance between the front suspension member and the front suspension member body mounting rear cushion LH.
3. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
(a) Temporarily install a new front suspension member body mounting rear cushion RH while confirming the installation direction.
Text in Illustration
NOTICE:
Position the front suspension member body mounting rear cushion RH in the correct direction.
(b) Install SST using the same procedure as the front suspension member body mounting rear cushion LH.
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
(c) Using SST, install the front suspension member body mounting rear cushion RH.
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
HINT
Perform the same procedure as the LH side.
4. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION
(a) Temporarily install a new front suspension member body mounting front cushion while confirming the installation direction.
Text in Illustration
NOTICE:
Position the front suspension member body mounting front cushion in the correct direction.
(b) Install SST using the same procedure as the front suspension member body mounting rear cushion LH.
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
(c) Using SST, install the front suspension member body mounting front cushion as shown in the illustration.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
Check that there is no clearance between the front suspension member and the front suspension member body mounting front cushion.
5. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER
(a) Install the 2 front suspension member body mounting rear stoppers to the front frame assembly.
6. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER
(a) Install the 2 front suspension member body mounting front stoppers to the front frame assembly.
7. INSTALL FRONT SUSPENSION MEMBER DYNAMIC DAMPER
(a) Install the front suspension member dynamic damper to the front frame assembly with the 2 bolts.
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
8. INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Installation
9. INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
10. INSTALL STEERING LINK ASSEMBLY Installation
11. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
(a) Install the front stabilizer bar with 2 front stabilizer link assemblies to the front frame assembly.
12. INSTALL FRONT NO. 1 STABILIZER BRACKET LH Installation
13. INSTALL FRONT NO. 1 STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
14. INSTALL ENGINE MOUNTING INSULATOR LH
for 2GR-FE: Installation
for 2AR-FE: Installation
15. INSTALL ENGINE MOUNTING INSULATOR RH
for 2GR-FE: Installation
for 2AR-FE: Installation
16. INSTALL FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE)
Installation
17. INSTALL FRONT ENGINE MOUNTING INSULATOR (for 2AR-FE)
Installation
18. INSTALL FRONT FRAME ASSEMBLY
for 2GR-FE: Installation
for 2AR-FE: Installation