Reassembly

SEAT: REAR SEAT ASSEMBLY: REASSEMBLY

1. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH

(a) Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 8 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.

2. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH

(a) Engage the 20 claws to install the rear seatback frame sub-assembly LH to the separate type rear seatback cover with pad LH.





3. INSTALL REAR SEATBACK CARPET LH

(a) Engage the 2 fasteners.





Text in Illustration





(b) Install the rear seatback carpet with the 3 clips.

4. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE

(a) Engage the guide.





(b) Install the rear seat center shoulder belt guide with the 2 screws.

5. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH

(a) Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 10 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.

6. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH

(a) Engage the 20 claws to install the rear seatback frame sub-assembly RH to the separate type rear seatback cover with pad RH.





7. INSTALL REAR SEATBACK CARPET RH

(a) Engage the 3 fasteners.





Text in Illustration





(b) Install the rear seatback carpet RH with the 5 clips.

8. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

(a) Engage the guide.





(b) Install the rear seat center armrest assembly with the bolt and washer.

9. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH

(a) Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.





10. INSTALL REAR SEAT AIRBAG ASSEMBLY LH Installation

11. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

(a) Engage the guide.





(b) Install the rear seat shoulder belt guide LH with the 2 screws.

12. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

13. INSTALL REAR SEAT AIRBAG ASSEMBLY RH

HINT
Use the same procedure as for the LH side Installation.

14. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

HINT
Use the same procedure as for the LH side.

15. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

(a) Engage the 4 fasteners.

(b) Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 12 new hog rings.





Text in Illustration





16. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY

(a) Engage the 13 hooks to install the rear seat cushion frame sub-assembly.