Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Camry L4-2.5L (2AR-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Braking Sensor/Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Braking Sensor/Switch: Testing and Inspection





BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE PEDAL LOAD SENSING SWITCH: ON-VEHICLE INSPECTION

1. INSPECT BRAKE PEDAL LOAD SENSING SWITCH

(a) Make sure that there is no looseness in the locking part and the connecting part of the connector.





(b) Disconnect the brake pedal load sensing switch connector.

(c) Check both the connector case and the terminal for deformation and corrosion.

OK:

No deformation or corrosion.

NOTICE:
* Do not remove the brake pedal load sensing switch from the brake pedal support assembly.
* When there is a malfunction in the brake pedal load sensing switch, replace the brake pedal support assembly.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the brake pedal load sensing switch (brake pedal support assembly).
pro multis · About Operation CHARM