Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Camry L4-2.5L (2AR-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION

1. INSTALL AIR CONDITIONER PRESSURE SENSOR

(a) Apply a sufficient amount of compressor oil to a new air conditioner pressure sensor.

Compressor oil:

ND-OIL 8 or equivalent

NOTICE:
* Keep the O-ring and O-ring fitting surfaces clean from dirt or any foreign matter.
* Do not use any compressor oil other than ND-OIL 8 or equivalent. If any compressor oil other than ND-OIL 8 or equivalent is used, compressor motor insulation performance may decrease, resulting in a leakage of electric power.

(b) Install the new air conditioner pressure sensor.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

NOTICE:
* Do not deform the piping.
* Make sure to confirm that the piping does not disengage from the plastic clamp.

(c) Connect the connector.

2. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT Service and Repair

3. WARM UP ENGINE Service and Repair

4. INSPECT FOR REFRIGERANT LEAK Service and Repair
pro multis · About Operation CHARM