Initialization

HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Manual Air Conditioning System): INITIALIZATION

1. INITIALIZATION SERVO MOTOR

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Press the A/C OFF switch.

(e) Turn the Techstream on.

(f) Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.

(g) According to the Techstream display, perform servomotor initialization.

HINT
During initialization, the DEF indicator light comes on, and then goes off when initialization has finished.

(h) According to the Techstream display, select the "Exit" switch to finish initialization.