Initialization

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: INITIALIZATION

1. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE

HINT
The ODO/TRIP change switch knob is located on the light side of the combination meter assembly.

(a) Turn the ignition switch to ON.

(b) Press the ODO/TRIP change switch knob until the TRIP A meter appears.

(c) Turn the ignition switch off.

(d) Turn the ignition switch to ON while pressing and holding the ODO/TRIP change switch knob. Hold the ODO/TRIP change switch knob until the following conditions are met and 5 seconds have elapsed.

(e) w/o Multi-information Display:

(1) The TRIP A meter shows "000000".

(2) The maintenance required reminder light goes off.

(f) w/ Multi-information Display:

(1) The TRIP A meter shows "000000".

(2) The multi-information display shows that the reset is complete.