Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure described below is for the LH side.

1. PRECAUTION (for HID Headlight)

Precaution

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FRONT BUMPER ASSEMBLY

Removal

4. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the 3 screws and bolt.

(b) Disengage the clamp.