Removal

2AR-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL

1. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR (except PZEV) Removal

2. REMOVE AIR FUEL RATIO SENSOR (except PZEV)

(a) Remove the hose clamp.





(b) Disconnect the air fuel ratio sensor connector.

(c) Using SST, remove the air fuel ratio sensor from the exhaust manifold.





SST : 09224-00010

3. REMOVE AIR FUEL RATIO SENSOR (for PZEV)

(a) Disconnect the air fuel ratio sensor connector.





(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold.





SST : 09224-00010