Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION

1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

(a) Engage the 2 claws to install the clearance warning ECU assembly.

2. INSTALL ECU INTEGRATION BOX RH

(a) Install the ECU integration box RH with the 2 nuts and bolt.

Bolt - Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

Nut - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect each connector.

3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL FRONT PANEL GARNISH RH Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure as for the LH side Installation.

10. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure as for the LH side Installation.

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSPECT SRS WARNING LIGHT

for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor

for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor