Removal

HEATING / AIR CONDITIONING: SOLAR SENSOR: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

for Radio and Display Type with Intuitive Parking Assist System: Removal

for Navigation Receiver Type: Removal

3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL (for Radio and Display Type with Intuitive Parking Assist System)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL (for Navigation Receiver Type)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE REAR CONSOLE BOX ASSEMBLY

Removal

6. REMOVE BOX BOTTOM MAT Removal

7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

8. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

9. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

10. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type) Removal

11. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type) Removal

12. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type) Removal

13. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY Removal

14. REMOVE SOLAR SENSOR (AUTOMATIC LIGHT CONTROL SENSOR)

(a) Disengage the 2 claws and remove the solar sensor (automatic light control sensor).