Installation

2GR-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Apply a light coat of engine oil to 4 new O-rings and install them to the 4 camshaft timing oil control valve assemblies.





Text in Illustration





(b) Install the 4 oil control valves with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Make sure that each O-ring is not cracked or does not jump out of position during installation.

(c) Connect the 4 oil control valve connectors.

2. CONNECT ENGINE WIRE

(a) Install the 2 wire harness brackets with the 2 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the 3 wire harness clamps.

3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

Installation.