Installation

2GR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION

HINT
Perform "Inspection After Repair" after replacing the spark plug and ignition coil assembly Programming and Relearning.

1. INSTALL SPARK PLUG

(a) Install the 6 spark plugs.





Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

HINT
Perform "Inspection After Repair" after replacing the spark plug Programming and Relearning.

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 6 ignition coils with the 6 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

HINT
Perform "Inspection After Repair" after replacing the ignition coil assembly Programming and Relearning.

(b) Connect the 6 ignition coil connectors.

(c) Connect the 2 wire harness clamps.

(d) Install the nut.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

3. INSTALL NO. 1 SURGE TANK STAY Installation

4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

Installation.