Removal

AUDIO / VIDEO: STEERING PAD SWITCH: REMOVAL

1. PRECAUTION

Service Precautions

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

4. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING PAD SWITCH LH

(a) for Type A:

(1) Disconnect the pad switch connector from the spiral cable and disengage the clamp.





(2) Remove the screw.





(3) Disengage the 2 pins and remove the steering pad switch LH.

(b) for Type B:

(1) Disconnect the steering pad switch assembly connector from the spiral cable.





(2) Remove the screw.





(3) Disengage the 2 pins and claw, and remove the steering pad switch LH.

7. REMOVE STEERING PAD SWITCH ASSEMBLY

(a) for Type A:

(1) Disconnect the pad switch connector from the spiral cable and disengage the clamp.





(2) Remove the screw.





(3) Disengage the 2 pins and remove the steering pad switch.

(4) Disengage the clamp.





(5) Remove the screw.





(6) Disengage the 2 pins and remove the steering pad switch assembly.

(b) for Type B:

(1) Disconnect the steering pad switch connector from the spiral cable.





(2) Remove the screw.





(3) Disengage the 2 pins and claw, and remove the steering pad switch.

(4) Remove the screw.





(5) Disengage the 2 pins and claw, and remove the steering pad switch assembly.