Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Highlander 2WD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





LIGHTING: STOP LIGHT SWITCH: INSTALLATION

1. INSTALL STOP LIGHT SWITCH ASSEMBLY

(a) Temporarily install the stop light switch assembly with the stop light switch lock nut.





(b) Turn the stop light switch assembly so that the clearance between the nut end and stop light switch cushion is between 0.5 to 2.4 mm (0.020 to 0.095 in.).





(c) Tighten the stop light switch lock nut.

Torque : 17 Nm (173 kgf-cm, 12 ft-lbf)

(d) Connect the connector.





2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) Installation

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

5. INSTALL FRONT DOOR SCUFF PLATE LH Installation
pro multis · About Operation CHARM