Installation

U151F AUTOMATIC TRANSAXLE: SPEED SENSOR: INSTALLATION

1. INSTALL SPEED SENSOR (NC SENSOR)

(a) Coat a new O-ring with ATF.

(b) Install the speed sensor with the bolt.

Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

HINT
Make sure to install the same manufacturer's sensor.

(c) Connect the speed sensor connector.

3. INSTALL AIR CLEANER BRACKET Installation

4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

7. INSTALL NO. 1 AIR CLEANER INLET Installation

8. INSTALL NO. 2 AIR CLEANER INLET Installation

9. INSTALL COOL AIR INTAKE DUCT SEAL Installation

10. INSTALL BATTERY Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.