Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the cruise control main switch as shown in the illustration.





(b) Connect the connector.

(c) Install the 2 screws.





Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

2. INSTALL STEERING PAD Installation

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL BATTERY SERVICE HOLE COVER ASSEMBLY Installation

7. INSTALL DECK BOARD ASSEMBLY Installation

8. INSPECT STEERING PAD Installation

9. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.