Removal

P313 HYBRID VEHICLE CONTROL: HYBRID VEHICLE CONTROL ECU: REMOVAL

1. REMOVE DECK BOARD ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE FRONT DOOR SCUFF PLATE RH Removal

5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

8. REMOVE HYBRID VEHICLE CONTROL ECU

(a) w/ Smart Key System:

Remove the certification ECU (smart key ECU assembly) Removal.

(b) Remove the tire pressure warning ECU Removal.

(c) Disconnect the 4 connectors from the hybrid vehicle control ECU.

(d) Disconnect the clamp.





(e) Remove the 2 nuts, bolt and hybrid vehicle control ECU.

(f) Remove the 4 screws and 2 brackets.