Removal

P313 HYBRID VEHICLE CONTROL: SUB RADIATOR: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE NO. 1 ENGINE UNDER COVER Coolant (for Engine)

4. DRAIN COOLANT (for Inverter) Coolant (for Inverter)

5. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY Removal

6. REMOVE NO. 2 AIR CLEANER INLET Removal

7. REMOVE NO. 3 INVERTER BRACKET Removal

8. REMOVE LOW PITCHED HORN ASSEMBLY Removal

9. REMOVE HIGH PITCHED HORN ASSEMBLY Removal

10. REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch) Removal

11. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch) Removal

12. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY Removal

13. REMOVE RADIATOR ASSEMBLY

(a) Slide the clamp and disconnect the hybrid radiator inlet hose from the radiator assembly.

(b) Slide the clamp and disconnect the hybrid radiator outlet hose from the radiator assembly.