Removal

POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

4. REMOVE ECU INTEGRATION BOX

(a) Disconnect each connector.

(b) Disengage the 3 clamps and disconnect the wire harness.





(c) Remove the bolt, 2 nuts and ECU integration box.

5. REMOVE POWER MANAGEMENT CONTROL ECU

(a) Disengage the 2 claws and remove the power management control ECU.